• <div id="wkayg"><optgroup id="wkayg"></optgroup></div>
  • print this page email this page go to the top of the page
    Home
    Contact Us
    Sitemap
    Quality, Health and Safety
    Health & Safety

    Health and Safety Organisation

    The Quality and Safety Manager is independent of the Construction Department,
    and this is in order to remain as objective and impartial as possible. A Site Safety
    Committee is formed on every site, and it consists of the Project Engineer / Site
    Safety Officer (chairman of the Committee) and the Safety Representatives. 
    A brief description of the duties and responsibilities of each individual is given below.

    The Project Manager is responsible for the operation of the Company’s Safety Policy
    on his site. He monitors his site to ensure the implementation of safety instructions.
    When the Company is acting as Health and Safety Coordinator at the Construction
    Phase, the Project Manager is responsible for ensuring:

     ?  Co-operation between contractors.
     ?  The development of the Health and Safety Plan and
         the provision of information and directions to contractors.             
     ?  The collection of information for inclusion in the Health
         and Safety File.
     ?  The laying down of site rules.

    The Quality and Safety Manager is responsible for the implementation of the
    Company’s Safety Policy and for ensuring a system of management to effectively
    control and co-ordinate the activities of contractors. Amongst his basic duties are 
    to advise the Managing Director and the Construction Manager on the legal
    requirements and safety matters in general, to check that the company’s work is
    being carried out in accordance with the legal requirements and recommended
    methods, to keep all the relevant safety records and to inform and instruct the 
    Site Safety Officers as to their duties.

    The Project Engineer / Site Safety Officer is responsible for ensuring the day-to-day
    implementation of the Company’s Safety Policy and safe working practices, for co-
    ordinating the activities of contractors, for developing the Health and Safety plan
    and for providing relevant information to contractors. Amongst his basic duties are 
    to inspect the site and produce a written report highlighting hazards, providing advice
    and indicating other matters checked and discussed during the inspection of the site.
    Depending on the complexity of the site, the frequency of inspections can be
    anything between once a week to once a month. Other duties are to summon and
    chair the Safety Committee meetings, to prepare and distribute the agenda and to
    keep the minutes.

    Amongst the basic duties of the Safety Representatives are to attend the Safety
    Committee meetings, to accompany the Labour / Safety Inspector or the Project
    Engineer / Site Safety Officer during the site inspections, to inform the Project
    Engineer / Site Safety Officer of any safety problems arising, to inform their
    colleagues about health and safety matters and generally to represent the
    employees at the particular site on health and safety matters.

    Monitoring of the Health and Safety Policy:

    Health and Safety forms an integral part of the Company’s Quality Management
    System. Further to this, a Health and Safety Plan is prepared specifically for each
    project undertaken by the Company.

    The Project Manager, in liaison with the Quality and Safety Manager, arranges for
    audits to be undertaken on the implementation of the Project Quality Plan as well as
    the Health and Safety Plan. The Project Manager also arranges for additional audits
    to be undertaken on particular sections of the work as required. Corrective and
    preventive action is taken as and whenever necessary.

    GCC has the following documented procedures in order to ensure that the
    requirements of the Quality Management System (QMS) are being followed
    at all times:

    ? Internal Audits: The Company carries out Internal Audits once a year (or at
      other frequencies decided upon by the Quality and Safety Manager) in order
      to ensure that the QMS of the Company is properly implemented and that it
      is also effective and efficient. The Internal Audit effectively serves several
      purposes:

     ?  It checks to see whether the QMS is working properly, 
        and whether there are any defects in the QMS.
     ?  It looks for possible improvements.
     ?  It discovers potential dangers or problems.
     ?  It stops waste and loss.
     ?  It checks that previously identified problems have
        been corrected.

    ? Handling of Nonconformities: Any employee can identify and raise a
      Nonconformity at all stages of the Company’s cycle. All Nonconformities
      identified, are recorded and evaluated by the Departmental Manager,  
      in order to apply the necessary Corrective and/or Preventive Actions.

    ? Management Review Meeting: The Management Committee and the Quality
      and Safety Manager meet and review the QMS once a year. All decisions
      taken at this meeting are communicated to all people directly involved, in
      order to take all the necessary Corrective and/or Preventive Actions.

    ? Corrective and Preventive Actions: All Nonconformities identified are  
      rectified by Corrective and/or Preventive Actions. After the Corrective and/or
      Preventive Actions have been executed (within the specified completion due
      date), verification is carried out by the relevant Departmental Manager.

    Health and Safety enforcement on site:

    In summary, the arrangements for carrying out the Health and Safety Policy 
    of the Company are the following:

    ?  All the employees are informed of the policy.

    ?  All the identified hazards associated with activities carried out as part of  
       the normal work of the company are dealt with by following the standard 
       company procedures that incorporate the elements of health and safety. 
       The precautions and procedures necessary for dealing with special risks 
       relating to types of sites, building and processes of work activities are 
       identified and implemented accordingly. Planned control measures are 
       taken when dealing with substances hazardous to health.

    ?  Written safe systems and methods of work for all company activities, 
       including maintenance and cleaning machinery and plant, are displayed on 
       the Safety Notice Board or issued to the employees whenever necessary.

    ?  All the necessary personal protective equipment and clothing are provided by 
       the employer and employees refusing to use them are removed from the site.

    ?  Health and safety inspections are carried out at regular intervals. Reports 
       are sent to the Quality and Safety Manager who monitors the implementation 
       of the policy and whenever necessary writes an improvement programme 
       listing what has to be done, who shall do it and setting a date for completion. 

    ?  Accidents are reported to the Quality and Safety Manager who arranges for 
       an investigation involving visits to the scene of the accident, collection of
       evidence and taking statements. A report is written and an analysis is
       carried out by comparing to previous accident reports.

    ?  All employees, and especially the Safety Representatives, can inform the
       Project Engineer / Site Safety Officer of any health and safety matters 
       or problems arising on site, either verbally or in writing. The site Safety 
       Notice Board can also be used for the supply and exchange of information.

    ?  The following information is displayed on the Safety Notice Board of each site:

     ?  The Company’s Health and Safety Policy Statement
     ?  Employers Liability Insurance Certificate
     ?  Form for Notification of Project
     ?  Emergency Procedures
     ?  Emergency Telephone Numbers
     ?  Location of the first aid boxes and the names of the
         First Aiders and/or the First Aid Appointed Persons
     ?  Site Safety Committee - List of Members and Minutes
        of Meeting
     ?  General Site Plan
     ?  The Company’s Site Safety Rules

                   

     

    Back to Quality, Health and Safety
    © 2008 GCC Ltd |  Disclaimer Design & Development by BDigital | Powered by WebStudio
    农村老熟妇精品_午夜福利啪啪体验区_青青青国产最新视频在线观看_亚洲中文波霸中文字幕